Oak USB ± 10V Isolated 8 Channel A/D Converter (V1.2a)

A/D Converter for Embedded Systems

The Oak 10V is a USB attached analog to digital converter board with 8 single-ended channels or 4 pseudo-differential channels. The ADC board can run at a sampling rate of up to 1kHz independent of the number of used channels. Voltages between -10V and +10V can be measured with a resolution of approximately 5mV (12 bit ADC).

The analog inputs are completely isolated from the USB circuit. There is no isolation between the analog input channels because they have a common ground. To simplify installation, the analog inputs feature disconnectable interfaces. The mating connectors have screw terminals to allow for a quick attachment of bare wires.

The Oak 10V can be integrated in a custom application very easily. The operating power as well as real time ADC data and uncritical device configuration data are all transferred through a simple USB cable. The very low power consumption, including automatic entering into sleep mode, allows using the device not only in fixed installation, but also in mobile applications.

Software

• Oak Studio - Process your Oak Sensor data in graphical and tabular form. Requires Windows XP or above. *NEW*
• Oak_ProgrammingGuide.pdf - Oak Programming Guide
• OakLib.zip - Oak Support Library v1.3 for Windows XP and above (See our OakLib 1.2 to 1.3 migration guide)
• Oak Programming Tutorial for Windows *NEW*
• OakLibTest Console Applications.zip - Sample source code for OakLib v1.3
• OakHID_WinCE_V10.zip - Oak USB-HID Driver for Windows CE 5.0/6.0. Only input devices supported!
• Oak_LabVIEW_Library.zip - LabVIEW VI v1.2.54 for Windows XP and above
• Oak_WinCE_Sample.zip - C Sample Code for Windows CE 5.0/6.0
• Linux sample code for Oak Sensors - Use the Oak Sensors under Linux
• Sample code for Visual Basic .NET and C# - Access your oak sensors from .NET languages
• DSS Services for Oak sensors - Bring support for Oak sensors in Microsoft Robotics Developer Studio